EOS – Serial

Serial There is a console port on the router. Normally, this port is used to debug. This port can also be used for serial transmission. The router has embedded a serial to TCP program. The data sent to the serial port is encapsulated by TCP/IP protocol stack and then is sent to the destination server. […]


MQTT To configure MQTT in MTX-Router EOS please refer to the application notes of our website AN3 “MTX-Router EOS management from Cervello Stem” and AN4 “MQTT connection to Cervello Stem”. MQTT is an OASIS standard messaging protocol for the Internet of Things (IoT). It is designed as an extremely lightweight publish/subscribe messaging transport that is […]

EOS – SMS Control

SMS Control For more detailed information about SMS control please refer to the application note AN5 “MTX-Router-EOS management via SMS”. SMS center: Used to forward received information. Name: Name of control brake operation. Phone Num: Designate to receive the mobile phone number control, if it is empty, receive any mobile phone number control. Action: Includes […]

EOS – Position

Position This menu is only valid for GPS versions. Configure the output port to output positioning data or differential data. GPS Output Interface: Choose the way of data output Protocol, GPS Center Address, GPS Center Port: Network Output Configuration GPS Information Contents: After checking, the output location information will contain the corresponding type data. ID […]