EOS – PPTP

PPTP Server IP or DNS Name: PPTP server’s IP Address or DNS Name. Remote Subnet: The network of the remote PPTP server. Remote Subnet Mask: Subnet mask of remote PPTP server. Permitted Authentication: Select permitted authentication. MPPE Encryption: Enable or disable Microsoft Point-to-Point Encryption. MTU: Maximum Transmission Unit. MRU: Maximum Receive Unit. NAT: Network Address […]

EOS – L2TP

L2TP User Name: User name to login L2TP Server. Password: Password to login L2TP Server. Gateway(L2TP Server): L2TP server’s IP Address or DNS Name. Remote Subnet: The network of remote PPTP server. Remote Subnet Mask: Subnet mask of remote PPTP server. Permitted Authentication: Select permitted authentication. MPPE Encryption: Enable or disable Microsoft Point-to-Point Encryption. MTU: […]

EOS – IPSEC

IPSEC Please refer to Aplication Note from our website “AN1- IPSec configuration on MTX-Router-EOS”. Name: Indicate this connection name, must be unique. Enabled: If enable, the connection will send tunnel connection request when it is reboot or re-connection, otherwise it is no need if disable. Local WAN Interface: Local addresss of the tunnel. Remote Host […]

EOS – GRE

GRE GRE (Generic Routing Encapsulation, Generic Routing Encapsulation) protocol is a network layer protocol (such as IP and IPX) data packets are encapsulated, so these encapsulated data packets to another network layer protocol (IP)transmission. GRE Tunnel (tunnel) technology, Layer Two Tunneling Protocol VPN (Virtual Private Network).   Name: GRE tunnel name. Through: The GRE packet […]

EOS – OpenVPN

OpenVPN Please refer to Aplication Note from our website “AN2- OpenVPN configuration on MTX-Router-EOS”. Server Start Type: Startup while wan is up or system is up. Auth Mode: Support pre-shared key authentication System Generation Key: Randomly generated by the system Pre-shared Key: Configure pre-shared key Server mode: Tunnel mode or bridge mode Peer Tun Ip/ […]