Titan – External Devices: Wavenis
The MTX-Router-Titan II, MTX-Router-Titan and MTX-Router-Titan mini devices are ready to read, store and send registers from Waveflow 868MHz pulse counters as well as WaveTherm 868MHz temperature sensors. An internal Wavecard 868MHz communication card can be included, allowing for communications with Wavenis devices up to 1km away (in direct vision), or up to 16km away using up to 3 boosters. When using […]
Titan – External Devices: W-Mbus Concentrator
From this section we can configure the Titan router as a W-MBus hub, to collect data from W-MBus devices, pack them and send them to a web platform. Remember that our Titan router must have the RF card (optional) in order to use this feature. It has a very detailed application note with examples of use, consult […]
Titan – External Devices: ModBus RTU/TCP
Modbus RTU/TCP The MTX-Router-Titan II, MTX-Router-Titan and MTX-Router-Titan mini devices are prepared to read, store and send registers from Modbus RTU devices. We can program a periodic reading of up to 10 Modbus devices, choosing the registers to be read, and the later sending of the readings to a webserver via a JSON object. Enabled: activate this option if we have one […]
Titan – External Devices: GPS Receiver
The Titan routers are GPS enabled and can be ordered with an internal GPS module built in. These devices (MTX-Router-Titan-3G-mini-GPS or MTX-Router-Titan-4G-mini-GPS) can also be used with an external GPS module by connecting it to either the microUSB port or a serial port. Enabled: activate this option if we have an internal (or external) GPS module connected […]
Titan – External Devices: Generic Serial Device
In this section we can configure a datalogger for RS232, RS485 or USB serial devices that allows we to read, store and send data collected from any of the previously mentioned interfaces. It is particularly useful to collect data from serial devices that send data frames periodically (temperature/humidity sensors, serial alarms, etc.). Enabled: activate this option if we […]
Titan – External Devices: Distance Sensor
The MTX-Router-Titan II, MTX-Router-Titan and MTX-Router-Titan mini devices are prepared to manage a Maxbotix distance sensor with an RS232 output. For example, we can send the measured distance periodically to a web platform, send an SMS alert when the distance is longer or shorter than a predetermined value, or even change a relay when the distance falls outside a particular range (for […]
Titan – External Devices: Temperature Sensor
The MTX-Router-Titan II, MTX-Router-Titan and MTX-Router-Titan mini devices are prepared to manage the MTX-Temp-RS232 temperature gauge. For example, we can send the temperature periodically to a web platform, send an SMS alert when the temperature is above or below a pre-determined level, or even change a relay when the temperature is outside a particular margin (Other >> Relay). Enabled: activate this option […]
Titan – External Devices: Logger
If we need the Titan device to collect data from external devices (Modbus, temperature and distance sensors, pulse counters, alarms, relays, etc.) in order to send them to our external server, first we must configure the internal logger, that is, how and where to collect the data from, and how to send it. This section allows to […]