Titan – Remote Console

If at any time we need to carry out a special operation on the router via a Telnet-type connection, we can do so using this section. With this special connection we can send an SMS, change the router’s configuration, change a relay, etc. by sending AT commands via a Telnet-type connection. Enabled: activate this option if we […]

Titan – Backup / Examples

We can create a complete security copy of the router’s configuration from this menu. We can save the configuration in a file and in the router whenever needed. It also allows we to load the user manuals quickly and easily. “Factory Settings” button: press this button if we want to restore the router to its factory settings […]

Titan – Relays

The MTX-Router-Titan II, MTX-Router-Titan and MTX-Router-Titan mini devices contain relays. These relays can be changed manually via a web console, Telnet, and SMS, as well as via temporization or according to a measured temperature or distance. The different configurations are applied to each relay independently; i.e. each relay can be configured in a different way. Schedule1: activate this option […]

Titan – SMS Control

This section allows we to configure the router control via SMS or a missed call. For example, we can configure it so that the router connects to 3G after receiving an SMS, or we can specify the telephone numbers authorized for this. SMS enabled: activate this option if we wish to be able to activate a 2G/3G […]

Titan – DynDNS

DynDNS The MTX-Router-Titan II, MTX-Router-Titan and MTX-Router-Titan mini are compatible with the DynDNS service and the No-IP service. If we do not have a SIM card with fixed IP address and we wish to use the external services of DynDNS or No-IP, we can configure them in this section. Enabled: activate this option if we wish to activate […]

Titan – AT Command Configuration

In this section it is possible to send an AT command directly to the router’s internal modem. For example, it could be interesting to check the network coverage, identify the telephone cells in the area, etc. It is also possible to configure up to five special AT commands which can be used to configure the router upon […]

Titan – User Permissions

In this section we can configure the permissions for the users that use the “user” account. The configuration options that are not selected will not appear in the left-hand menu for the “user” account. ADDITIONAL NOTES Once the configuration is finished, click “SAVE CONFIG” to save the changes. Remember that the router should be restarted for the […]

Titan – Time Server (NTP)

The router has a real time clock that allows time to be kept in the event of a loss of poour. This clock may periodically require synchronization with time servers via NTP protocol. Enabled: activate this option if we wish to use the NTP time servers NTP server 1: IP address or DNS of time server […]

Titan – Periodic Autoreset

In this section we can configure a programmed autoreset of the router. Autoreset not enabled: activate this option if we do not want the router to reset automatically Autoreset every X hours: activate this option if we want the router to reset itself every X hours Number of hours: if we decide we want the […]

Titan – Jamming Detection

The MTX-Router-Titan II, MTX-Router-Titan and MTX-Router-Titan mini devices can be configured to detect possible cases of jamming and take the appropriate action. That is, the Titan devices are capable of detecting suspect interference caused by possible GSM/GPRS inhibitors. This can be useful for some security applications. This option is not available for 4G models. If jamming is detected, […]