I/O Description: MTX-IOT [3-S-N-GPS] / MTX-IOT [4-S-N-GPS]

Description of I/O interfaces: DB15 expansion connection: 3 digital inputs (2 of them pulse counters), 2 digital outputs and 2 A/D conversors (0-50V in tension mode, 0-20mA in current mode) Serial interfaces: 1x RS232 (DB9) or 1x RS485 (configurable with switches) GPS: internal, connected to the secondary port MTX-Tunnel software uses these inputs/outputs as follows: […]

I/O Description: MTX-IOT [4-S-P-N]

Description of I/O interfaces: DB15 expansion connection: 3 digital inputs (2 of them pulse counters), 2 digital outputs and 2 A/D conversors (0-50V in tension mode, 0-20mA in current mode) Serial interfaces: 1x RS232 (DB9), 1x RS232 (DB15) Relay: 1x internal relay 6A (220Vac). Accessible from terminal block MTX-Tunnel software uses these inputs/outputs as follows: […]

I/O Description: MTX-IOT [4-S-N-WC868]

Description of I/O interfaces: DB15 expansion connection: 3 digital inputs (2 of them pulse counters), 2 digital outputs and 2 A/D conversors (0-50V in tension mode, 0-20mA in current mode) Serial interfaces: 1x RS232 (DB9) or 1x RS485 (configurable with switches) Wavecard 868MHz: internal radio card, connected to secondary port MTX-Tunnel software uses these inputs/outputs […]

I/O Description: MTX-2G-T2 / MTX-3G-JAVA-T2 / MTX-4G-JAVA-T2

Description of I/O interfaces: Serial interfaces: 1x RS232 (DB9), 1x RS232 (secondary DB9) MTX-Tunnel software uses these inputs/outputs as follows: GPIO LOCATION PIN I/O FUNCTION @MODBUS GPIO3 Terminal block 3 Digital input SMS alarm/user/pulse counter 3/17-18 The column “GPIO” indicates the virtual GPIO corresponding to the GSM module inside the modem The column “Location” informs […]

I/O Description: MTX-2G-T / MTX-3G-JAVA-T / MTX-4G-JAVA-T / MTX-4G-JAVA-T-S

Description of I/O interfaces: Serial interfaces: 1x RS232 (DB9), 1x RS485 GPS: internal, only in MTX-3G-Java-T-G model MTX-Tunnel software uses these inputs/outputs as follows:   GPIO LOCATION PIN I/O FUNCTION @MODBUS GPIO3 Terminal block 3 Digital input SMS alarm/user/pulse counter 3/17-18 The column “GPIO” indicates the virtual GPIO corresponding to the GSM module inside the […]

I/O Description: MTX-IoT [3-S-N-N] / MTX-IoT [4-S-N-N]

Description of I/O interfaces: DB15 expansion connection: 3 digital inputs (2 of them pulse counters), 2 digital outputs and 2 A/D conversors (0-50V in tension mode, 0-20mA in current mode) Serial interfaces: 1x RS232 (DB9), 1x RS232 (DB15) or 1x RS485 (configurable with switches) MTX-Tunnel software uses inputs/outputs the following way: GPIO LOCATION PIN I/O […]