Automatic connection to the Cervello platform via SMS
Scenario details: It is necessary to connect the MTX modem to the Cervello Web Platform. The Web Platform will be used as “Device Manager” and through which the status of the MTX modem can be known in real time (coverage, IP, etc.) as well as being able to perform operations on the MTX modem (readings […]
Tunnel – Writing to Modbus RTU devices based on the digital and analog inputs of the modem.
Scenario details: 2 sensors need to be monitored. An analog 0-10V sensor and a digital dry contact sensor The modem has 2 PLCs with Modbus RTU support connected to its RS485 port. One has the Modbus RTU @ 1 address and the other has the Modbus RTU @ 2 address. When changing the state of […]
Tunnel – Control of the relays, digital outputs, digital inputs and 0-10V/4-20mA analog inputs of an MTX modem from a SCADA system using the MODBUS TCP protocol.
Scenario details: It is necessary to control 1 relay, 4 digital outputs (also connected to relays), 4 dry contact inputs and 2 analog inputs (one 0-10V type and another 4-20mA) located in a remote location Communication must be done from a SCADA system using Modbus TCP protocol For simplicity it is intended to use SIM […]
Tunnel – JSON customization and sending topics in the data frames sent by MTX-Tunnel.
Scenario details: 8 dry contact sensors need to be monitored. In the status of the entries, they must be sent quickly to an MQTT platform (example Cervello) when a change occurs in one of them. It is also necessary to monitor 2 analog sensors, one of the 0-10V type and the other of the 4-20mA […]
Tunnel – DATALOGGER. Telemetry (digital and analog inputs) sent periodically to broker MQTT (via JSON object) + transparent IP-RS232 gateway for remote access to RS232 device.
Scenario details: 3 digital inputs and 2 analog inputs must be sent to a web server via HTTP request using a JSON object The MTX will collect the digital and analog data every 10 minutes, sending it to an MQTT broker using a JSON object. If there is no 4G/3G/2G coverage or the web server […]
Tunnel – DATALOGGER. Telemetry (digital and analog inputs) sent periodically to the web server via HTTP (via JSON object) + transparent IP-RS232 gateway for remote access to the RS232 device.
Scenario details: 3 digital inputs and 2 analog inputs must be sent to a web server via HTTP request using a JSON object The MTX will collect digital and analog data every 10 minutes, sending it to the web server via HTTP request using a JSON object. If there is no 4G/3G/2G coverage or the […]
Tunnel – Automatic activation of relay output depending on the value of an analog 0-10V probe.
Scenario details: It is necessary to control 1 relay to activate the pumping motor of a well An analog 0-10V level sensor is available. When the level is low, that is, when the sensor returns a value below 2V, the relay acting on the motor must be activated to pump water. When the sensor returns […]
Tunnel – Automatic activation of relays according to the value of Modbus registers. Automatic sending of state changes to the MQTT/S platform.
Scenario details: It is necessary to control 8 fans of a farm autonomously. Each fan has an associated Modbus RTU protocol temperature probe, with RS485 connection When the Temperature Sensor X is above 30 degrees, the associated Fan X should be activated to facilitate air circulation and lower the temperature of the room. When Temperature […]
Tunnel – Remote management of up to 9 digital outputs and relays through Telnet and/or MQTT/S.
Senario details: You need to be able to change the status of 9 remote relays to enable / disable a number of devices connected to them. Such remote activation needs to be done through telnet and / or an MQTT / S platform. For telnet access, only TCP connections must be allowed from authorized IPs […]
Tunnel – Activate a relay by voice call and by dry contact inputs to open the parking gate.
Scenario details: You need to be able to operate a relay with a 5 second pulse to open a motorized garage door. Such activation needs to be done by voice call through a mobile phone It should only be possible to operate the relay from the authorized telephone numbers: +34666123456, +34666123457 and +346661234568 It must […]