Looking for something else?
Tunnel – AT Commands Batch Files
Inside the flash memory of the modem is a folder called “atscripts”. Within this folder batch files of AT commands can be incorporated to be executed on certain occasions or by using the command AT ^ MTXTUNNEL = file.
For example, if a “miscommands.txt” file is found inside the “atscripts” folder with the content:
When you run the command AT ^ MTXTUNNEL = EXECUTE, mycommands.txt the modem will execute, in order, that list of commands (it will activate the output GPIO0, wait 5 seconds, and deactivate the output GPIO0.
There are a series of special files for executing batch commands that will be automatically executed under certain circumstances, as detailed below. These files must be placed in the “atscripts” folder:
After starting the modem, this batch file will be executed if it has content. Useful in case you need special actions to start the modem.
This batch file is run just before LOGGER captures its digital / analog inputs. See Example 8.5 for more information.
This batch file is executed just after LOGGER captures its digital / analog inputs. See Example 8.5 for more information.