ACCESSIBILITY
The aids at your disposal
This site is accessible and offers many features allowing all Internet users to navigate easily.
The main logo
On all pages, the logo displayed in the banner allows you to return to the home page of the site with a single click.
The menus
The main menu
The main menu under the banner allows you to access the main pages and categories of this blog.
The quick access menu
In the banner, just before the search field, a quick access menu is proposed. The first two links of this menu – entitled “Go to content” and “Go to categories” – allow you to position yourself directly at the level of the main content of each page and at the level of the list of article categories. These links are particularly useful for people who navigate by keyboard or cell phone. This quick access menu also allows you to go directly to the help page (this page).
The footer menu
At the bottom of the page, the footer menu allows you to access additional pages such as the “Legal Notice” page and the site map.
Ariadne's thread
On all the pages of the site, a breadcrumb trail is displayed at the top of the main content.
This breadcrumb trail allows you to locate yourself in the tree structure of the site.
It shows you the path taken from the home page to the current page, and also allows you to go back up the site tree through links.
The site map
On all pages, a site map is accessible via a link in the footer menu.
This site map allows you to have an overview of the site’s tree structure and to directly access the article, category or page of your choice.
The search engine
On all pages, a search field is available in the banner. When you make a search, the search engine lists the articles and pages of the site that best match your expectations.
Features offered by your browser
In addition to the aids available, the site has been designed to allow your browser to take full advantage of its own features.
Enlargement of the font size
On all the pages of the site, you have the possibility to enlarge the size of the characters. If you are on a PC, use the key combination Ctrl + + to enlarge the font size. The key combination Ctrl + – allows you to reduce the size of the characters. Successive presses of these keys allow you to increase or decrease the font size in increments. Note also that the key combination Ctrl + 0 (the number “zero”) allows you to return to the default text size. Mac users, simply replace the Ctrl key with the Cmd key in the above mentioned combinations to perform the same actions.
Keyboard navigation
This site has been designed to allow keyboard navigation on all pages.
In most cases, you just need to press the Tab key on your keyboard to navigate successively from one clickable element to another clickable element in the page, in the reading order.
Conversely, if you want to go backwards in reading order, use the Shift + Tab key combination.
Printing
Keyboard users, you can print any page of the site by accessing the desired page, then pressing Ctrl + P on your keyboard if you are on a PC, or Cmd + P if you are on a Mac.
Bookmarking
Keyboard users, you finally have the possibility to bookmark any page. To do this, go to the desired page, then press Ctrl + D on your keyboard if you are on a PC, Cmd + D if you are on a Mac.
Enter the “ethernet” or “modem” connection type:
For an ethernet configuration, make sure the IP parameters are compatible with server access according to the concentrator local network configuration. For an ethernet connection, the configuration must be compatible with the concentrator’s local network topology so that it can access the servers. This configuration is done from the “Networks” configuration page (see section 3.2.2.3: “Networks”).
For a modem connection, the modem configuration must be correct before a connection can be set up. This configuration is done from the “Modem” configuration page (see section 3.2.2.4: “Modem”).
The parameters for the servers to be configured are at least the following:
Therefore the following fields need to be configured: “Interface”, “Type”, “Server type”, “Address”, “Port”, “Login” and “Password”.
The other fields can be left at the default values subject to the directories having been properly created beforehand. See section 3.1.2: “Configuration files” for more details.
Wait. The concentrator will reboot using its factory configuration.
