Descripción E/S: MTX-IoT-S
Descripción de las interfaces de E/S: Conexión bornas: 8 GPIOs configurables por software como Entrada Digital o como SalidaDigital, y 2 conversores A/D (0-50V en modo tensión. 0-20mA en modo corriente, configurablespor microswitches) Interfaces serie: 1 puerto RS232 (DB9). y 1 puerto RS485 1 relé de 16V 1A GPS interno conectado al puerto serie secundario […]
Descripción E/S: MTX-IoT
Descripción de las interfaces de E/S: Conexión de expansión DB15: 3 entradas digitales (3 de ellas contadoras de pulsos), 2 salidas digitales y 2 conversores A/D (0-50V en modo tensión. 0-20mA en modo corriente) Interfaces serie: 1 puerto RS232 (DB9). 1 puerto RS232 (DB15) ó 1 puerto RS485 (configurable por swtiches) GPS interno conectado al […]
Descripción E/S: MTX-T
Descripción de las interfaces de E/S: Interfaces serie: 1 puerto RS232 (DB9) y 1 puerto RS485 GPS: interno, únicamente el modelo MTX-T [3-N]-G El software MTX-Tunnel usa las entradas salidas de la siguiente manera: GPIO SITUACIÓN PIN E/S FUNCIÓN GPIO2 Terminal block 3 Digital input Activates by positive (>3V) La columna “GPIO” hace referencia al […]
I/O Description: MTX-2G-T2 / MTX-3G-JAVA-T2 / MTX-4G-JAVA-T2
Description of I/O interfaces: Serial interfaces: 1x RS232 (DB9), 1x RS232 (secondary DB9) MTX-Tunnel software uses these inputs/outputs as follows: GPIO LOCATION PIN I/O FUNCTION @MODBUS GPIO3 Terminal block 3 Digital input SMS alarm/user/pulse counter 3/17-18 The column “GPIO” indicates the virtual GPIO corresponding to the GSM module inside the modem The column “Location” informs […]
Descripción E/S: MTX-T2
Descripción de las interfaces de E/S: Interfaces serie: 1 puerto RS232 (DB9) y 1 puerto RS232 (DB9 secundario) El software MTX-Tunnel usa las entradas salidas de la siguiente manera: GPIO SITUACIÓN PIN E/S FUNCIÓN GPIO2 Terminal block 3 Digital input Activates by positive (>3V) La columna “GPIO” hace referencia al nombre de la señal E/S […]
I/O Description: MTX-2G-T / MTX-3G-JAVA-T / MTX-4G-JAVA-T / MTX-4G-JAVA-T-S
Description of I/O interfaces: Serial interfaces: 1x RS232 (DB9), 1x RS485 GPS: internal, only in MTX-3G-Java-T-G model MTX-Tunnel software uses these inputs/outputs as follows: GPIO LOCATION PIN I/O FUNCTION @MODBUS GPIO3 Terminal block 3 Digital input SMS alarm/user/pulse counter 3/17-18 The column “GPIO” indicates the virtual GPIO corresponding to the GSM module inside the […]
I/O Description: MTX-IoT [3-S-N-N] / MTX-IoT [4-S-N-N]
Description of I/O interfaces: DB15 expansion connection: 3 digital inputs (2 of them pulse counters), 2 digital outputs and 2 A/D conversors (0-50V in tension mode, 0-20mA in current mode) Serial interfaces: 1x RS232 (DB9), 1x RS232 (DB15) or 1x RS485 (configurable with switches) MTX-Tunnel software uses inputs/outputs the following way: GPIO LOCATION PIN I/O […]