Monitoring of the Electrical Network
Monitoring of the Electrical Network with MTX-IoT-S
The monitoring of the electrical network is a typical industrial IoT solution in which the advantages of the new smart IoT devices are used to detect failures in the power supply. Thanks to the early detection of electrical problems, bigger problems are avoided through rapid and effective action. This happens thanks to the collection of real-time information on fault indicators with smart modems that transmit the information through LTE/4G. This case study is based on an actual project in the Southeast Asia Pacific (APAC) area.
Device: MTX-IoT-S, 4G programmable IoT modem with 8x digital I/Os, 2x ADC and battery
Platform: IoT Platfotm or Owner IoT Platfotm
Read more about this case study in the following link. 
Enter the “ethernet” or “modem” connection type:
For an ethernet configuration, make sure the IP parameters are compatible with server access according to the concentrator local network configuration. For an ethernet connection, the configuration must be compatible with the concentrator’s local network topology so that it can access the servers. This configuration is done from the “Networks” configuration page (see section 3.2.2.3: “Networks”).
For a modem connection, the modem configuration must be correct before a connection can be set up. This configuration is done from the “Modem” configuration page (see section 3.2.2.4: “Modem”).
The parameters for the servers to be configured are at least the following:
Therefore the following fields need to be configured: “Interface”, “Type”, “Server type”, “Address”, “Port”, “Login” and “Password”.
The other fields can be left at the default values subject to the directories having been properly created beforehand. See section 3.1.2: “Configuration files” for more details.
Wait. The concentrator will reboot using its factory configuration.
