Skip to main content
Suchen Sie etwas anderes?
Table of Contents
Password
Set the user name and password, to support the input of 32 characters.
The new password must not exceed 32 characters in length and must not include any spaces. Enter the new password a second time to confirm it.
NOTE: Default username is admin.
It is strongly recommended that you change the factory default password of the router, which is admin. All users who try to access the router’s web-based utility or Setup Wizard will be prompted for the router’s password.
Enter the “ethernet” or “modem” connection type:
For an ethernet configuration, make sure the IP parameters are compatible with server access according to the concentrator local network configuration. For an ethernet connection, the configuration must be compatible with the concentrator’s local network topology so that it can access the servers. This configuration is done from the “Networks” configuration page (see section 3.2.2.3: “Networks”).
For a modem connection, the modem configuration must be correct before a connection can be set up. This configuration is done from the “Modem” configuration page (see section 3.2.2.4: “Modem”).
The parameters for the servers to be configured are at least the following:
Therefore the following fields need to be configured: “Interface”, “Type”, “Server type”, “Address”, “Port”, “Login” and “Password”.
The other fields can be left at the default values subject to the directories having been properly created beforehand. See section 3.1.2: “Configuration files” for more details.
Wait. The concentrator will reboot using its factory configuration.
