Looking for something else?
EOS – WAN
Select the appropriate wide area networking mode according to different requirements. Set the corresponding parameters according to different connection modes.
Dual Both Online: WAN and Bkup WAN are both online.The system will automatically switch back to the main chain when the main link is available if enabled.
Link Fail to Restart: Time of restart system for all link fail.
Disable WAN connection
Put in the IP address, subnet mask, default gateway, and DNS Server(optional) assigned by the provider.
User Name: Login users’ ISP(Internet Service Provider)
Password: Login users’ ISP
Dial String: Dial number of users’ ISP
APN: Access point name of users’ ISP
Network Mode: Select the appropriate network model according to the environment.
Permitted Authentication: Select the authentication protocol according to the requirements.
Connect Fail: Switch to Backup WAN after link failure times.
Dial Fail to Restart: Time of restart system for this link fail.
Keep Alive: This function is used to detect whether the Internet connection is active. It will redial to users’ ISP immediately to make the connection active if users set it and when the router detect the connection is inactive. Specifies how many seconds to wait before reconnect the link after it terminates.
None: do not set this function
Ping: Send ping packet to detect the connection, when choose this method. Users should also configure “Keep Alive Interval”, “Keep Alive Server IP” and “Keep Alive Server IP2” items.
Route: Detect connection with route method, when choose this method. Users should also configure “Keep Alive Interval”, “Keep Alive Server IP” and “Keep Alive Server IP2” items.
PPP: Detect connection with PPP method, when choose this method. Users should also configure “Detection Interval” item.
Keep Alive Fail: Switch to Backup WAN after keep alive fail times.
NOTE: When users choose the “Route” or “Ping” method, it’s quite important to make sure that the “Keep Alive Server IP” and “Keep Alive Server IP2” are usable and stable, because they have to response the detection packet frequently.