Suchen Sie etwas anderes?
DDNS
If user’s network has a permanently assigned IP address, users can register a domain name and have that name linked with their IP address by public Domain Name Servers (DNS). However, if their Internet account uses a dynamically assigned IP address, users will not know in advance what their IP address will be, and the address can change frequently. In this case, users can use a commercial dynamic DNS service, which allows them to register their domain to their IP address, and will forward traffic directed at their domain to their frequently-changing IP address.
User Name: Users register in DDNS server, up to 64 characteristic.
Password: Password for the user name that users register in DDNS server, up to 32 characteristic.
Host Name: Users register in DDNS server, no limited for input characteristic for now.
Type: Depends on the server.
Wildcard: Support wildcard or not, the default is OFF. ON means *.host.3322.org is equal to host.3322.org.
Do not use external ip check: Enable or disable the function of ‘do not use external ip check.
Force Update Interval: Unit is day, try forcing the update dynamic DNS to the server by settled days.
DDNS Status shows connection log information.
Enter the “ethernet” or “modem” connection type:
For an ethernet configuration, make sure the IP parameters are compatible with server access according to the concentrator local network configuration. For an ethernet connection, the configuration must be compatible with the concentrator’s local network topology so that it can access the servers. This configuration is done from the “Networks” configuration page (see section 3.2.2.3: “Networks”).
For a modem connection, the modem configuration must be correct before a connection can be set up. This configuration is done from the “Modem” configuration page (see section 3.2.2.4: “Modem”).
The parameters for the servers to be configured are at least the following:
Therefore the following fields need to be configured: “Interface”, “Type”, “Server type”, “Address”, “Port”, “Login” and “Password”.
The other fields can be left at the default values subject to the directories having been properly created beforehand. See section 3.1.2: “Configuration files” for more details.
Wait. The concentrator will reboot using its factory configuration.
