EOS – Traffic Flow
Traffic Flow Visual display of statistics of the upstream and downstream, as well as the total traffic.
EOS – OpenVPN
OpenVPN Please refer to Aplication Note from our website “AN2- OpenVPN configuration on MTX-Router-EOS”. Server Start Type: Startup while wan is up or system is up. Auth Mode: Support pre-shared key authentication System Generation Key: Randomly generated by the system Pre-shared Key: Configure pre-shared key Server mode: Tunnel mode or bridge mode Peer Tun Ip/ […]
EOS – AN5: MTX-Router-EOS management via SMS
Introduction The MTX-Router EOS can be managed by sending SMS. This functionality allows the user to be able to carry out actions via SMS such as restarting, checking the coverage, connecting or disconnecting from the network or knowing the value of any router configuration parameter. The SMS control configuration menu is found under “Serial and […]
EOS – AN2: OpenVPN configuration on MTX-Router-EOS
Introduction This application note will explain how to configure the MTX-Router-EOS in order to perform a client – server configuration using OpenVPN and shared key. It is not part of this application note how to configure the network interfaces of the computers, nor windows firewall options and so on. OpenVPN server configuration From the VPN […]
EOS – AN1: IPSec configuration on MTX-Router-EOS
Introduction This application note will explain how to configure the MTX-Router-EOS in order to perform a client-server configuration using IPSec and shared key. It is not part of this application note how to configure the network interfaces of the computers, nor windows firewall options and so on. Server Configuration From the VPN -IPSec menu, we […]
EOS – Upgrade
Upgrade Update software to get new features. Firmware Upgrade: Contact us for New firmware versions. If the Router is not experiencing difficulties, then there is no need to download a more recent firmware version, unless that version has a new feature that you want to use. NOTE: When you upgrade the Router’s firmware, […]
EOS – Configure
Configure Reset router settings: Click the Yes button to reset all configuration settings to their default values. Then click the Apply Settings button. NOTE: Any settings you have saved will be lost when the default settings are restored. After restoring the router is accessible under the default IP address 192.168.1.1 and the default password […]
EOS – System Time
System Time Select time zone of your location. To use local time, leave the check mark in the box next to Use local time. To adjust time by the system and refresh to get the time of the web, user can set to modify the time of the system. They can change to adjust […]
EOS – Management
Management Configure WEB server parameters. Protocol: This feature allows you to manage the router using either HTTP protocol or the HTTPS protocol. Local Web GUI port: Set the access port of the WEB server. For example, when the gateway address is 192.168.1.1 and set the server port 1010, you will enter the address bar […]
EOS – Password
Password Set the user name and password, to support the input of 32 characters. The new password must not exceed 32 characters in length and must not include any spaces. Enter the new password a second time to confirm it. NOTE: Default username is admin. It is strongly recommended that you change the […]