Vai al contenuto principale
Suchen Sie etwas anderes?
PPTP
Server IP or DNS Name: PPTP server’s IP Address or DNS Name.
Remote Subnet: The network of the remote PPTP server.
Remote Subnet Mask: Subnet mask of remote PPTP server.
Permitted Authentication: Select permitted authentication.
MPPE Encryption: Enable or disable Microsoft Point-to-Point Encryption.
MTU: Maximum Transmission Unit.
MRU: Maximum Receive Unit.
NAT: Network Address Translation.
User Name: User name to login PPTP Server.
Password: Password to log into PPTP Server.
Enter the “ethernet” or “modem” connection type:
For an ethernet configuration, make sure the IP parameters are compatible with server access according to the concentrator local network configuration. For an ethernet connection, the configuration must be compatible with the concentrator’s local network topology so that it can access the servers. This configuration is done from the “Networks” configuration page (see section 3.2.2.3: “Networks”).
For a modem connection, the modem configuration must be correct before a connection can be set up. This configuration is done from the “Modem” configuration page (see section 3.2.2.4: “Modem”).
The parameters for the servers to be configured are at least the following:
Therefore the following fields need to be configured: “Interface”, “Type”, “Server type”, “Address”, “Port”, “Login” and “Password”.
The other fields can be left at the default values subject to the directories having been properly created beforehand. See section 3.1.2: “Configuration files” for more details.
Wait. The concentrator will reboot using its factory configuration.
