Vai al contenuto principale
Suchen Sie etwas anderes?
As previously mentioned, the configuration of the MTX-Router-Titan II, MTX-Router-Titan and MTX-Router-Titan mini devices is done using a web environment. What is needed?
- A PC with a web browser (Chrome, IExplorer, Firefox, …) and Ethernet port
- An Ethernet cable to connect the PC with the MTX device
Steps to access the configuration environment:
- Connect the Ethernet cable to the PC and MTX device.
- The PC must have a fixed IP address and of the form 192.168.1.X, given the default IP address of the MTX-Router-Titan II, MTX-Router-Titan and MTX-Router-Titan mini devices is 192.168.1.2.
- Open a browser with the address http://192.168.1.2:
Enter the “ethernet” or “modem” connection type:
For an ethernet configuration, make sure the IP parameters are compatible with server access according to the concentrator local network configuration. For an ethernet connection, the configuration must be compatible with the concentrator’s local network topology so that it can access the servers. This configuration is done from the “Networks” configuration page (see section 3.2.2.3: “Networks”).
For a modem connection, the modem configuration must be correct before a connection can be set up. This configuration is done from the “Modem” configuration page (see section 3.2.2.4: “Modem”).
The parameters for the servers to be configured are at least the following:
Therefore the following fields need to be configured: “Interface”, “Type”, “Server type”, “Address”, “Port”, “Login” and “Password”.
The other fields can be left at the default values subject to the directories having been properly created beforehand. See section 3.1.2: “Configuration files” for more details.
Wait. The concentrator will reboot using its factory configuration.
